Large storage ottoman – Cub- style leather ottomans are an attractive way to create extra seating for guests and to hide the storage. These ottomans can be made in any size you need and in every color of leather. Mount wheels on the bottom and your large storage ottoman seat can easily be moved around the room to function as a footstool, chair or open storage container. When you have finished the ottoman can be used as a coffee table or slipped under a table until it is needed again.
Make a leather large storage ottoman; Cut four pieces of MDF (medium density fiberboard) 12 inches square. These will be the sides of the footrest. Cut two pieces of MDF 12 and 1/2 inches square. The two pieces are the top and bottom of the footstool. Mark one as the top. Mark the other to the bottom. Place a sideboard on your worksheet. Mark the top “top”, mark the left “L” and right “R”.
Large storage ottoman, Apply a bead of construction adhesive along the left side of Directors 1. Press the glue to the right of the board 2, so that the edges are even. Nail through the outside of the plate 2 at the end of the Management Board 1. You must have an “L” shape. Apply the adhesive along the left side of board 2. Press the glue on the right side of board 3, so that the edges are equal. Nail through the outside of the board 3 at the end of the board 2. Rotate the cube top to bottom. Apply a bead of construction adhesive around the lower ends of the plates 1 to 4. Place the bottom shelf in the tip line and the corners.