White Loft Bed With Desk Style
White loft bed with desk – A computer table set up under a loft bunk bed provides a cozy work space for your child. This defined space for homework help your child concentrate during the study period while saving nearly 30 square meters floor area. The entire project should take about 3-4 hours. These directions are for a twin size mattress, but you can change them to larger beds by changing timber dimensions
White loft bed with desk style, first build bed. Put the two 75-inch beams and the two 36-inch beams in a rectangle with the 36 inch beams inside the 75-inch beams. Connect the rectangle with two wood screws at each joint. Set 39- inch by 75-inch plywood on the frame. So that all sides of the paper flush with all sides of the frame. Then set plywood board with a wood screw at a corner. And then drilled through the plywood plate and into the beam below it. Replace the four positions, drilled sides up, in a rectangle about the size of your rectangular frame. Hoist up the frame and attach it to the posts by pushing the bolts through the drilled holes. Connect two positions on one of the narrow ends of the frame by means of a 50-inch plank.
Build desk for white loft bed with desk style. Forming a rectangle by means of the two 39th-inch beams and the two 24-inch bars. Add 39-inch by 24-inch plywood on top of the frame and screw it in place as you did with the bed frame. Set a 30-inch post in the corner of the frame set in the angle formed by two beams. Screw the post in place by four wood screws into a square. Then using the auger to drill a 1 1/2 inch diameter hole in the center of a long side of the table, is placed 1 1/2 inches from the edge. Use this hole for wiring when installing your computer.